Cung Cấp Các Sản Phẩm Chất Lượng
Xuất Xứ Rõ Ràng
-
Construction:
Side Entry (2pc/3pcs Bolted, fully weld)
Top Entry
Operation:
Manual/Electric/Pneumatic/Hydraulic
Feature:
● API6D standard and applicable international specifications as required.
● Full port or reduce port design.
● RF, RTJ, or BW end connections.
● Trunnion mounted, split body.
● Bi-directional valves.
● Floating seat rings.
● Soft seat or metal seat available.
● SPE and DPE seat design.
● Fire-safe tested.
● Blow-out proof stem.
● Anti-static Electricity.
● Locking Device.
● Automatic cavity pressure relief.
● Emergency sealant injection stem seals and seat face.
● Positive Flow Stem Indicator.
● ISO 5211 mounting pad.
● Low operating torque for ease of operation and reduced actuator cost.
● Extended stem and fittings for below ground service.
Product Range:
Size: Rating: 2” to 56” 150lb,300lb,600lb 2” to 48” 900lb 2” to 30” 1500lb 2” to 20” 2500lb -
Construction:
Side Entry ( 2pc/3pcs Bolted, 3pcs thread, fully weld)
Top Entry
Operation:
Manual/Electric/Pneumatic/Hydraulic
Feature:
● API608 standard and applicable international specifications as required.
● Full port or reduce port design.
● RF ,RTJ, NPT, SW or BW end connections.
● Soft seat or metal seat design.
● Fire-safe tested.
● Blow-out proof stem.
● Anti-static Electricity.
● Locking Device.
● Low operating torque for ease of operation and reduced actuator cost.
● Automatic cavity pressure relief.
● Positive Flow Stem Indicator.
● ISO 5211 mounting pad.
● Extended stem for Cryogenic service
● Non-standard valves designed according to customer specifications.
Materials:
● Carbon Steel
● Stainless Steel
● High temperature alloy steel
● Duplex Stainless Steel
● Super Duplex Stainless Steel
● Ni Alloy
Product Range:
Size: Rating: 1/2” to 10” 150lb,300lb 1/2” to 4” 600lb 1/2” to 4” 900lb 1/2” to 2” 1500lb,2500lb -
eature:
● API602 standard and applicable international specifications as required.
● Full or reduced port design.
● RF ,RTJ,SW,BW and NPT end connections.
● T-Pattern or Y-Pattern.
● Integral body seat.
● Integral flange for RF RTJ end connections.
● OS&Y outside screw and yoke
Materials:
● Carbon Steel
● Stainless Steel
● High temperature alloy steel
● Duplex Stainless Steel
● Super Duplex Stainless Steel
● Ni Alloy
Product Range:
Size: Rating: 1/2” to 2” 150lb,300lb,600lb,900lb,1500lb,2500lb,4500lb -
Type:
Swing Type/ Piston Type/ Dual Plate Wafer/ Non Slam/ Titling disc/ Cryogenic
Construction:
Bolted Bonnet/Pressure seal/Wafer
Feature:
● Full /Reduced port design.
● RF ,RTJ ,BW or wafer end connections.
● Anti-rotation disc.
● Horizontal or vertical service.
● Renewable or Integral seat rings available
● Non-standard valves designed according to customer specifications.
Materials:
● Carbon Steel
● Stainless Steel
● High temperature alloy steel
● Duplex Stainless Steel
● Super Duplex Stainless Steel
● Ni Alloy
Product Range:
Size: Rating: 1/2” to 56” 150lb 1/2” to 48” 300lb 1/2” to 42” 600lb 1/2” to 36” 900lb 1/2” to 30” 1500lb 1/2” to 20” 2500lb
ĐỐI TÁC
Các đối tác mà Nakada Việt Nam đã và đang hợp tác
