• Type:

    Swing Type/ Piston Type/ Dual Plate Wafer/ Non Slam/ Titling disc/ Cryogenic

    Construction:

    Bolted Bonnet/Pressure seal/Wafer

    Feature:

    ●   Full /Reduced port design.

    ●   RF ,RTJ ,BW or wafer end connections.

    ●   Anti-rotation disc.

    ●   Horizontal or vertical service.

    ●   Renewable or Integral seat rings available

    ●   Non-standard valves designed according to customer specifications.

    Materials:

    ●   Carbon Steel

    ●   Stainless Steel

    ●   High temperature alloy steel

    ●   Duplex Stainless Steel

    ●   Super Duplex Stainless Steel

    ●   Ni Alloy

    Product Range:

    Size:Rating:
    1/2” to 56”150lb
    1/2” to 48”300lb
    1/2” to 42”600lb
    1/2” to 36”900lb
    1/2” to 30”1500lb
    1/2” to 20”2500lb
  • Construction:

    Side Entry ( 2pc/3pcs Bolted, 3pcs thread, fully weld)

    Top Entry

    Operation:

    Manual/Electric/Pneumatic/Hydraulic

    Feature:

    ●   API608 standard and applicable international specifications as required.

    ●   Full port or reduce port design.

    ●   RF ,RTJ, NPT, SW or BW end connections.

    ●   Soft seat or metal seat design.

    ●   Fire-safe tested.

    ●   Blow-out proof stem.

    ●   Anti-static Electricity.

    ●   Locking Device.

    ●   Low operating torque for ease of operation and reduced actuator cost.

    ●   Automatic cavity pressure relief.

    ●   Positive Flow Stem Indicator.

    ●   ISO 5211 mounting pad.

    ●   Extended stem for Cryogenic service

    ●   Non-standard valves designed according to customer specifications.

    Materials:

    ●   Carbon Steel

    ●   Stainless Steel

    ●   High temperature alloy steel

    ●   Duplex Stainless Steel

    ●   Super Duplex Stainless Steel

    ●   Ni Alloy

    Product Range:

    Size:Rating:
    1/2” to 10”150lb,300lb
    1/2” to 4”600lb
    1/2” to 4”900lb
    1/2” to 2”1500lb,2500lb
  • eature:

    ●   API602 standard and applicable international specifications as required.

    ●   Full or reduced port design.

    ●   RF ,RTJ,SW,BW and NPT end connections.

    ●   T-Pattern or Y-Pattern.

    ●   Integral body seat.

    ●   Integral flange for RF RTJ end connections.

    ●   OS&Y outside screw and yoke

    Materials:

    ●   Carbon Steel

    ●   Stainless Steel

    ●   High temperature alloy steel

    ●   Duplex Stainless Steel

    ●   Super Duplex Stainless Steel

    ●   Ni Alloy

    Product Range:

    Size:Rating:
    1/2” to 2”150lb,300lb,600lb,900lb,1500lb,2500lb,4500lb
  • Type: T Type/ Y Type/ Bellow seal/ Cryogenic Construction: Bolted Bonnet/Pressure seal Operation: Manual/Electric/Pneumatic/Hydraulic Feature: ●   BS1873 standard and applicable international specifications as required. ●   RF ,RTJ or BW end connections. ●   Plug, ball or needle disc available. ●   Renewable or Integral seat rings available ●   OS&Y outside screw and yoke ●   Anti-friction bearing yoke sleeve, for greater sizes. ●   Lantern ring and leak off pipe upon request. ●   Extended stem, lock device, bypass, position indication on customer’s request. ●   Non-standard valves designed according to customer specifications. Materials: ●   Carbon Steel ●   Stainless Steel ●   High temperature alloy steel ●   Duplex Stainless Steel ●   Super Duplex Stainless Steel ●   Ni Alloy Product Range:
    Size: Rating:
    1/2” to 48” 150lb
    1/2” to 36” 300lb
    1/2” to 30” 600lb
    1/2” to 24” 900lb
    1/2” to 20” 1500lb
    1/2” to 16” 2500lb

Title

Go to Top